Rectangular Glue-On Attachment
This fastener can be used on any equipment you need secured that DOES NOT have a built in security slot or other means of attachment. You can also use this as an anchor point to attach the cable to a desk or other immovable object. This is a permanent attachment.
Glue-on Fastener
This composite rectangular glue-on attachment is a permanent installation. Can be used on plastic, wood or metal. Enough adhesive will be supplied to secure the number of attachments ordered.
Rectangular Glue-On Fastener specs
This composite fastener permanently adheres using a commercial strength adhesive (included). Can be used on plastic, wood, or metal.
Glue-on Anchor instructions (CSP-891)
The glue-on anchor can be used as an anchor point for the security cable and/or glued to equipment that has no other attachment method available.
- Thoroughly scratch the surface where the fastener is to be installed with the scrub pad (included).
- Clean the flat side of the fastener and the intended installation area with the alcohol pad provided. Wipe dry with a clean cloth (do not let it air dry or it will leave a residue.)
- Cover the entire flat surface of the fastener with a thin layer of adhesive. Spread it with the applicator tip. Do not touch glue with your fingers.
- Hold it on the prepared surface with light, steady pressure for 30 seconds. (keep fingers away from the edges to avoid getting glue on your skin). Let dry for a minimum of 1 hour before passing the cable through. Glue will bond completely after 24 hours.
NOTE: Once attached, this fastener is permanent.