Phazer Fiberoptic Alarm System
The Phazer Fiberoptic Alarm System was a breakthrough in computer protection in its time. We have since come up with a newer system, the PC Tab Alarm System, which is easier to use and doesn't require permanently attaching anything to your equipment. We will still be supporting the Phazer Fiberoptic Alarm System, however, some parts may require a 4-6 week lead time.
 |
|
| The PHAZER Fiberoptic Security Alarm System uses fiberoptics to secure your equipment. The fiber is attached to your equipment using any of the fasteners shown below. The fiber cable loops back into the PHAZER unit which emits light pulses through the fiber. If the fiber is cut or disconnected, the PHAZER unit sends an alarm to the CENTRAL ALARM PANEL which is programmed to call security (or a monitoring service). | |
Full Fiberoptic Product Line
CS01 - FIBEROPTIC CONNECTION SET - Use
of the fiberoptic connection set allows you to have splice points
at several intervals in the fiber to make removing computers
for repair easy. Includes 2 male connectors and 1 double
female connector.
|
|
 SPECS INSTALLATION INSTRUCTIONS |
PAC1 - PHAZER AREA CONTROLLER - Located at each cluster of computers, the PHAZER Unit transmits light pulses through the fiberoptic circuit, alerting authorities if the fiber is disconnected, cut or interrupted in any way! Each unit can handle 300' of fiber with 6 splice points. |
| PN01A - PHAZER/NET CENTRAL ALARM PANEL - The PHAZERNET is a multi-zone control unit that provides problem identification and reporting. It can be easily integrated into existing alarm systems and can also provide notification to remote guard locations or an alarm monitoring service. Standard features include: Keypad for programming capability; Administrative control via PIN assignments, 110 decibel audible alarm; areas/rooms with about 100 workstations (requires additional PHAZER Area Controllers.) |
| DSC-550 - EPOXY GLUE-ON DISC FASTENER - Used when securing equipment that does not have surface screws. Also used on monitors, printer, or any other equipment that needs securing. Measures 2" in diameter. This fastener adheres permanently to your equipment with a commercial strength Instant adhesive gel. Enough adhesive will be included to secure the number of fasteners ordered. Can be used on plastic, wood, or metal |
| PLT-591 - GLUE-ON EPOXY RECTANGULAR FASTENER - Similar to the Disc, but has been designed to be used where space to adhere is short or narrow. Great for zip drives. Measures 3/4" x 2 1/2". This fastener adheres permanently to your equipment with a commercial strength Instant adhesive gel. Enough adhesive will be included to secure the number of fasteners ordered. Can be used on plastic, wood, or metal. |
USF1 - UNIVERSAL SECURITY FASTENER -  The Universal Security Fastener is a steel cylinder with a capped fitting which restricts access to an existing, external housing bolt on the computer. Once capped, the screw is concealed. The fiber is then passed through the hole and the CPU is secured. |
|
KAB-552 - COMMERCIAL STRENGTH ADHESIVE - Used to secure the glue-on fasteners to your equipment. The .07oz tube will attach 4 discs or rectangular plates, or 2 glue-on plates. |
This system is completely user installable. You just need to have your telephone tech run a dedicated wire from the PHAZER/NET Alarm panel or your current alarm system to the computer room being secured as shown in the Sample Lab Layout. Then simply attach the appropriate fasteners to the equipment, string the fiber and plug it in! Complete instructions are included.
| New!!! Search our site |
| Search Site by Keyword: |
-- OR --
|
| Search by partnumber: |
 - Create An Account - Track/View Orders - Load/View Saved Cart - Load/View Quotes
|
|||||||||
| By viewing and using this site, you agree to the following terms and conditions. | Computer Security Products,
Inc. P.O. Box 7549 Nashua, NH 03060 Tel: (800) 466-7636 Fax: (800) 615-1954 |
 |
TABLE OF CONTENTS |